Corrosion of metal plate production process
Corrosion of metal plate production process
Corrode metal plate is also called etching plate. The main search using the mask, after etching process processing system to do three steps from the Braille metal plate or a concave metal plate.
Corrosion of metal plate production process:
1) Cutting: by drawing (layout size) in size, surrounded by more than plus not less than 5mm burrs. Shears with 720 foot-operated shears, the surface smooth, surrounded by non-Maori.
2) metal corrosion signs Finish:
(1) mechanical polishing: polishing machine with 2.2-4 kW of mechanical polishing wool, cloth round use motor speed is generally-3000 revolution / min.
(2) alkali treatment: 10-15% aqueous solution of sodium hydroxide at 65-85 ℃ in the metal plate cook 10-30 seconds, and then washed with water, immersed in 5% of the weight of Ming acid aqueous solution.
(3) powder processing method: using a flat brush dipped in old powder (double pink) version of the child will be a uniform method of cross brush ears, except to effect until decontamination face, skin or remove oxygen, and then with a 5% aqueous solution of potassium dichromate In closed.
(4) The drawing processing method: using mechanical or manual drawing methods were brushed metal plate surface treatment, metal surface regeneration to achieve the effect.
What is the metal flat sun signs
What is the metal flat sun signs
Metal flat sun signs sun cards mainly use photosensitive way, the film which was dissolved in different colors to make it through the development of methods was significant in the metal plate, so as to achieve a metal plate with a descriptive sense of purpose.
Here are some frequently come into contact with the metal flat plate concrete drying process and formula (flat sun signs, the process):
Flat aluminum plate sun: is the use of photographic plate method, the different pigments into the film inside, so that text, graphics presented in a metal plate, so as to explain the significance of having a metal plate.
1) material: wool size requirements are generally larger than the plate size (5mm or more), the board smooth, without potholes.
2) Pre-treatment: â‘ several ways polishing process â‘¡ â‘¢ â‘£ drawing oxidation.
3) Water closed: will handle good board, through to oil, except after the film can not be quickly immersed in water and exposed to the air.
4) glue: glue configuration. Plastic: 200-230 grams of water: 1000ml, added photosensitizer (weight casein, ammonium) boiling water and cook for 2 hours to fully dissolve the glue, the temperature dropped to 30-50 ℃ 25-30 grams after glue evenly coated in metal plate, drying stand.
5) copy: You can use SB750 vacuum type machine photographic copy copy, light 60-90cm classification when signs comprehensive analysis
After take between 40-80 seconds, put warm water into the color developing solution dyed one minute.
6) Paul Light: After fully dyed brand, dry it with a brush or spray gun painted with gloss paint (general paint brand with the eyes or free baking gloss paint).
7) Cut into.
Flat sun signs are generally used for interior products, small household appliances and non adverse weather affected equipment. The advantage is plate-making process is simple, fast, timely delivery, defective rate and low fees. The disadvantage is that by the sun and rain, easy to fade. You can not do outdoor signs.
Woven Interlining,Interlining Woven,Fusible Interlining,Woven Interlining Fabric
Taizhou fengfu import & export co.,ltd , https://www.ffinterlining.com