First, the correct use of aluminum alloy doors and windows
Many people use caution in the daily use of doors and windows, and can not effectively control their own strength when switching, thus causing unnecessary damage, here you need to remind everyone, the best quality products Can not withstand the use of brute force, so in the daily use of aluminum alloy doors and windows, we push and pull the action as light as possible. If you find that there is difficulty in pushing and pulling, do not pull it vigorously. Check it patiently to see if there is any fault. Dust and deformation are the fundamental causes of the problem.
When the weather changes, you should also pay attention to maintenance and use, such as rainy days and snowy days. After the rain stops, you should wipe the water in the dry chute with a soft cloth, and feel the push and pull. You can also apply a small amount of oil to reduce friction. After the wind and sand weather stops, the dust should be removed from the recesses of the aluminum alloy doors and windows with a vacuum cleaner.
Second, do regular cleaning work
Aluminum alloy doors and windows must be cleaned in daily use, especially the dust and dirt at the corners of the door frame. If it is not cleaned in time, it will affect the normal use. Therefore, before cleaning, the dust should be removed with a vacuum cleaner. Next, wipe it with a softer rag and mild water. If the dirt is difficult to remove, use a neutral detergent to help wipe it. Remember to use acidic and alkaline cleaning agents, which will cause damage to the surface of doors and windows. Laundry detergent soap will not work. Do not use the door frame as a support point when cleaning.
Third, Fu Xuan reminds you: daily inspection is essential
　　 1. In daily use, it should be checked regularly, especially to check the link parts, hardware accessories, etc. If there are damaged parts in time to change, avoid small problems and become big problems. There are three places on the aluminum alloy doors and windows that are the most vulnerable to damage. They are the positioning pin, the wind bracing, and the ground spring. These three places are the most vulnerable, so these places must be clearly seen and the problems should be repaired in time.
　　 2 , in the place where you often rub, you must regularly apply oil to avoid the difficulty of pushing and pulling during use.
　　 3 , at the joint of the frame, there are several screws to pay careful attention to, in the event of loosening, it is necessary to do the fastening in time.
　　 4 , sealing tops and glass sealant is the key to determine the sealing and insulation of doors and windows, once the phenomenon of shedding occurs, it is necessary to find relevant materials in time to fill.
Using Fuxuan aluminum alloy doors and windows in the right way can make the most of the long-term use, and some improper use will not only cause damage, but also make the doors and windows lose good sealing and heat preservation. At the same time, regular maintenance for it will greatly extend the service life.
  popular searches:  Aluminum art accessories    Luxury aluminum art villa door    Aluminum art stair railing   Aluminum art security window   Aluminum art fence    Aluminum art fence   Aluminum canopy
Other Plastic Machine,Environmental Stone Paper Machine,Plastic Waterproof Material Machinery,Stone Paper Production Line
Changzhou Xinzhongshun Nonwoven Machinery Co., Ltd. , https://www.xzsnonwovenmachine.com