HDPE with a melt flow rate of 15-20g/10min is used as the masterbatch carrier; the flame retardant system is octabromoether (addition mass fraction 2.4%) and antimony trioxide (additional mass fraction 0.8%), and then stabilizer The ratio of the carrier, the flame retardant system and the stabilizer is 80:120:11, and the technical index of the obtained flame retardant masterbatch is; the outer dimension: 2-4 mm×3-5 mm, the melting point ≥130°C, Bromine content ≥ 28%, moisture ≤ 0.22%.
The selection of workwear fabric requires the selection of suitable fabrics to make workwear according to the characteristics and industry of the workwear you need. Its hygroscopicity, water absorption, heat preservation, ventilation, gas-containing properties, thermal conductivity, thermal radiation resistance, water resistance, sweat resistance, etc. can protect the human body from external and internal pollution. Dust, soot, industrial gas and its dust, etc., these require that the selection of tooling fabrics should be determined according to the actual situation.
Workwear Fabric,Workwear Fabrics,Breathable Fabric Workwear,Fabric For Workwear
Suzhou Yipai Textile Co., Ltd , https://www.fabric-yp.com