[China Glass Network] With the improvement of social development and technology, people have further requirements for the quality of life. As an important part of the family kitchen life, gas cookers have become a hot spot in the kitchen appliance market.
In addition to the pursuit of a large firepower experience, the safety of the use of cooking appliances has become a concern of consumers. Imagine that while enjoying the fun of cooking, suddenly the glass panel bursts, how much damage will be caused to the user, and not to mention physical damage, even psychological problems may be triggered. At the same time, how much negative impact on the brand and how much energy is needed to make up. So today, let's talk to you about the cause of the bursting of the cooker panel and the corresponding solution, so that everyone can avoid it one by one in the later stage. With the development of society and the improvement of science and technology, people have further requirements for the quality of life. As an important part of the family kitchen life, gas cookers have become a hot spot in the kitchen appliance market.
First, the stove of the iron fire cover, due to the rust of the fire cover for a long time, the rust point blocked the vent hole of the fire cover for a long time, resulting in the flame can not be burned out.
Solution: Always clean the fire cover. When cleaning the cooker, do not only wipe the panel. Always treat the dross and rust spots in the firearm.
Second, the opening size of the countertop is larger than the opening size of the cooker. Because it is too large, the place where the cooker is stressed is not the position of the metal shell, but the glass panel. The force of long-term suspension easily causes the cooker panel to burst.
Solution: Be sure to first determine the size of the cooker, then open the hole in the cabinet, how big the hole is.
Third, the user puts the high temperature things directly on the panel, such as the wok that has just been used, the kettle that has just been burned, and the like.
Solution: Remind the user to avoid placing high temperature objects on the glass panel immediately.
Fourth, the cooker joint, gas pipe or other parts leaking gas, the gas leaking out causes the local high temperature of the cooker to burst.
Solution: Regularly check the gas valve, check the gas interface regularly, and replace the pressure reducing valve of the liquefied gas regularly. The pipe used for installation should choose the bellows with steel wire.
5. Firearms, also known as fire covers, do not match the position of the fire after cleaning, resulting in a long time tempering of the firearms or a flame from the gap. This will not only cause the panel to burst, but also easily deform the firearm.
Solution: After cleaning the fire cover, be sure to put it back as it is, and do not let the gap between the fire cover and the seat.
Through the above reason analysis and solution description, it can be seen that the panel burst should be avoided from the root cause, and the user needs to understand these common senses and carefully follow them in use. Usually, users don't know if they don't know much. This requires the guide to tell the user the details in the later part of the product sales. The installer will emphasize the service when they come to the door. In addition, do not blindly save the cost of accessories when installing, be sure to use high-quality pipe to avoid small loss.
Cotton Ladies Blouse,Ladies Blouse,Custom Blouse,Print Blouse
SHAOXING OSTAR APPAREL CO., LTD. , https://www.ostarappale.com